General data  
Year/s of production 2010 –            
Presentation Bologna Motor Show  – 02 December 2010
VIN span
Number produced
Design Ferrari Corse Clienti
Manufactured by Ferrari S.p.A.
   
Technical Specifications  
Chassis Aluminium-Spaceframe
Length 4527 mm
Width 1937 mm
Height 1163 mm
Wheelbase 2650 mm
Front suspension Independent wheel suspension, double wishbones, coil springs, anti-roll bar, adaptive suspension, Multimatic dampers
Rear suspension Independent wheel suspension, multi-link wishbones with rigid joints, coil springs, anti-roll bar, adaptive suspension, Multimatic dampers
Front track 1692 mm
Rear track 1616 mm
Front tyres 9“ x 19 “, single-nut light alloy wheels
Tyres 255/650 19“ x 9 “
Rear tyres 11“ x 19 “ ,single-nut light alloy wheels
Tyres 305/690 19“ x 11 “
Front brakes Brembo Ceramic brake system CCM2, integrated ABS- and ASR-system, 398 x 38 mm
Rear brakes Brembo Ceramic brake system CCM2, integrated ABS- and ASR-system, 380 x 34 mm
Dry weight 1218 kg
Body material Aluminium
Body type Two-seater Berlinetta
   
Engine  
Type Mid-rear engine – longitudinal installed
Number of cylinders V8 – 90°
Displacement 4499 ccm
Bore and Stroke 94 x 81 mm
Camshaft 2 overhead per cylinder bank
Valves 4 per cylinder, variable valve train, natural aspiration
Compression ratio 12,5:1
Ignition Electronic ignition
Lubrication Dry sump
Maximum power 570 hp/419 kW – 9.000 rpm
Specific power output 127 hp/l
Weight/Power ratio 2,14 kg/hp
Maximum torque 540 Nm – 6.000 rpm
Specific torque output 120 Nm/l
Fuel management Electronic double injection
Clutch Dual-clutch
Weight distribution 42% front, 58% rear
Gearbox Dual-clutch 7 speed + rev F1 gearbox
Electronics E-Diff3, F1-Trac, high performance ABS, 3 position manettino
Fuel tanks 113 litres
   
Performance  
Acceleration 0-100 km/h: Less than 3,4 sec.
Fiorano lap time 1 min 16,5 sec.

 

The 458 Challenge is the star of the Bologna Motor Show
while Ferrari burn up the track with Challenge and F1 cars

Source: Ferrari

Maranello, 2nd December – Ferrari makes a different contribution to the 35th edition of the Bologna Motor Show with a stand devoted entirely to its racing activities plus an intense track programme.

The 458 Challenge also makes its world debut at the Bolognese event. This mid-rear V8 berlinetta is derived from the 458 Italia and is the fifth model used by Ferrari in its single-series racing programme. The latter is currently split into Italian, European and North American championships which will be flanked next year by the new Asia-Pacific series. With the new 458 Challenge, Ferrari puts an exceptional combination of extreme performance, superb fun behind the wheel and unique driving emotions at the finger-tips of its sporting, professional and gentleman-driver clients.

Also on the stand is the F430 GTC owned by the AF Corse team, one of the cars with which the Maranello marque won the Constructors’ title in the GT2 class of the Intercontinental Le Mans Cup 2010.

The Prancing Horse’s line-up of track models is completed by the FXX and 599XX laboratory cars, each of which has its own eponymous research and development programme involving in-depth collaboration between Ferrari technicians and our client test-drivers. At the very centre of the stand is the F60, the single-seater the Scuderia Ferrari Marlboro fielded in the 2009 Formula 1 World Championship season.

A rich and varied programme is planned for the competition arena in Area 48 with the classic end-of-year battle between the drivers of the Ferrari Challenge Trofeo Pirelli, now in its 18th season, dominating the action. No less than 16 cars from the Italian and European series will be taking each other on in a three-round competition on Wednesday, December 8th. However, the high point of the programme will be the Formula 1 exhibition with which Luca Badoer will bring his extraordinary 13-year career as the Scuderia Ferrari’s official test-driver to an end. He’ll put an F60 through its paces and a simulated pit-stop, as a farewell homage to the tifosi and enthusiasts present.

458 CHALLENGE

Compared to the 458 Italia, the direct injection 4499 cc V8 remains strictly in production tune, with an output of 570 hp at 9,000 rpm. That said, modifications have been made to the gear ratios and calibration of its dual-clutch F1 gearbox to guarantee higher torque at lower revs. The 458 Challenge is also equipped with the E-Diff electronic differential already employed on the road-going version, a first for Ferrari’s track-only cars.

Significant work has also gone into cutting the car’s weight. This focused on both the exterior and interior with Ferrari’s engineers concentrating in particular on reducing the thickness of the bodyshell panels and on using lightweight materials, such as carbon-fibre and Lexan.

The new 458 Challenge also has a specific suspension set-up with steel uniball joints, stiffer springs, single-rate alloy dampers, centre-nut 19” forged rims, larger dimension Pirelli slicks and a ride height lowered by 50mm all round. It is also equipped with the new generation Brembo CCM2 brakes integrated with the latest ABS system which debuted on the 599XX, Ferrari’s extreme experimental laboratory car.

Another first for a Ferrari Challenge model is the adoption of the F1-Trac traction control system, the most sophisticated of its kind. Developed in-house by Ferrari, the F1-Trac system constantly monitors levels of grip for maximum high-performance road-holding. Two specific track-biased calibrations have been developed for this application, with control logics and strategies derived from Ferrari’s extensive racing experience in the F1 and GT championships. The F1-Trac is completely integrated with the E-Diff to guarantee maximum stability and acceleration both into and out of corners.

The ABS/EBD, F1-Trac and E-Diff calibration settings are selected via the manettino on the steering wheel, the first time this solution has been adopted on a model developed for the Ferrari Challenge series. The driver has a choice of three configurations: OFF position (traction control deactivated), position 1 and position 2. The latter two settings have progressively higher levels of control system intervention and are selected in accordance with grip conditions on the track.

In the course of the intensive development sessions involved in honing the 458 Challenge for the track, the engineers also managed to improve the car’s lap time at Fiorano by two seconds over that of its predecessor, resulting in a new record of just 1’16.5”. Equally impressive is the amount of lateral grip the new car generates – up to 1.6G.

The Ferrari 458 Challenge on track at Vallelunga
Source: Ferrari

Maranello, 28 July 2010 – The fine tuning of the newly born Ferrari 458 Challenge continues and, as from yesterday, it was at the Vallelunga circuit for a test, with two drivers, the Italian Maurizio Mediani and the Argentine Jaime Melo, taking on the role of test driver, as they took turns at the wheel of the Prancing Horse sports car. At the end of two days at the Roman circuit, both men were pleased with what had been achieved.

According to Mediani the 458 Challenge is “very quick and extremely good fun,” its handling inherited from the road going car from which it is derived, combined with modifications made for its specific use in racing. Melo, just back from the fifth round of the American Le Mans Series, in which he races a F430 GT2 run by Team Risi Competizione, highlighted how much the driving experience is enhanced by the electronics systems operated with the now classic manettino on the steering wheel, a first for a car used in the Ferrari one-make series. “I am sure that Prancing Horse competition owners will be very pleased with this car,” commented the Argentine before leaving the circuit to prepare for the next ALMS round, which takes place on 7 August at the Mid Ohio circuit.

458 Challenge debuts at Maranello
Source: Ferrari

Maranello, July 14th 2010 – The 458 Challenge has made its world premiere debut in Maranello during the Annual Dealer Meeting, a traditional event that brings together the representatives of Ferrari’s international sales network.

The new berlinetta, which will flank the F430 Challenge in the Ferrari Challenge Trofeo Pirelli in the 2011 season, is the fifth model used by Ferrari in its one-make championship which, next year, will be extended to include a new Asia-Pacific series.

Coming just a few months after the Frankfurt Motor Show unveiling of the 458 Italia on which it is based, the 458 Challenge introduces a number of important modifications to adapt it for competition use.

The direct injection 4497 cc V8 remains strictly in production tune, with an output of 570 hp at 9,000 rpm. That said, modifications have been made to the gear ratios and calibration of its dual-clutch F1 gearbox to guarantee higher torque at lower revs. The 458 Challenge is also equipped with the E-Diff electronic differential already employed on the road-going version, a first for Ferrari’s track-only cars.

Significant work has also gone into cutting the car’s weight. This focused on both the exterior and interior with Ferrari’s engineers concentrating in particular on reducing the thickness of the bodyshell panels and on using lightweight materials, such as carbon-fibre and Lexan.

The new 458 Challenge also has a specific suspension set-up with solid aluminium bushings, stiffer springs, single-rate dampers, centre-nut 19” racing rims, larger dimension Pirelli slicks and a ride height lowered by 30mm all round. It is also equipped with the new generation Brembo CCM2 brakes which debuted on the 599XX, Ferrari’s extreme experimental laboratory car, and which are integrated with an ABS system that features two configurations – low grip and high performance for dry surfaces.

Another first for a Ferrari Challenge model is the adoption of the F1-Trac traction control system, the most sophisticated of its kind. Developed in-house by Ferrari, the F1-Trac system constantly monitors levels of grip for maximum high-performance road-holding. Two specific track-biased calibrations – wet and dry – have been developed for this application, with control logic and strategies derived from Ferrari’s extensive racing experience in the F1 and GT championships. The F1-Trac is completely integrated with the E-Diff to guarantee maximum acceleration out of corners.

The required ABS, F1-Trac and E-Diff calibration settings are selected via the manettino on the steering wheel, the first time this solution has been adopted on a model developed for the Ferrari Challenge series. The driver can thus either chose from the WET or DRY configurations. In high grip conditions it is also possible to select CT-OFF to de-activate the F1-Trac traction control.

In the course of the intensive development sessions involved in honing the 458 Challenge for the track, the engineers also managed to improve the car’s lap time at Fiorano by two seconds over that of its predecessor, resulting in a new record of just 1’16.5”. Equally impressive is the amount of lateral grip the new car generates – up to 1.6G.

With the new 458 Challenge, Ferrari is offering its sportier clients – professional and gentlemen drivers alike – a car that is extremely responsive, with great performance and superb handling. This mid-rear V8-engined berlinetta will allow Ferrari Challenge participants to enjoy to the full the exhilarating cut and thrust of the race weekends on the world’s leading circuits, as well as the passion that has always been an integral part of Ferrari’s one-make championship.

 
Archives